|
|
|
|
|
|
|
|
|
|
|
|
|
-
Highest energy saving efficacy
in electric power consumption
|
|
|
70%
energy saving than current
T8- 40W fluorescent lamp,
or 50% energy saving
than
T5-28W or LED FL
|
|
-
Eminent life time : 20,000
hours
|
|
|
By
stable pressure, flow and
temperature of fluorescent
lamp
|
|
-
High light color : The
guarantee over lighting
color Ra : 86
|
|
|
A
spot lighting speed, not
glittering and the soft
radiation
|
|
-
Lower temperature : Not
over 35°C
|
|
|
The
electric energy is inverted
to light energy so users
can reduce
the
electric consumption of
air conditional
|
|
-
Simple installation : Ballast
stabilizer and light starter
are needless - Built-in
Type
|
|
|
Users
can turn on the light by
just connecting one electric
wire with
the
other wire
|
|
-
Multiple use : Big
signboard, office, factory,
department store, underground
garage and so on
|
|
|
|
|
|
|
|
|
|
|
|
This
product is composed of Integration
circuit mode, inner tube,
delicate ion half light
panel, high-end outer glass
tube and cover.
|
|
|
It
is needless to install light
starter and it is easy to
install and use without
any bracket
and lamp
shade.
|
|
|
Ballast
stabilizer is built-in the
lamp, therefore, any other
Ballast stabilizer is not
required.
|
|
|
Users
can reduce the installation
time because of any other
ballast stabilizer wiring
will not be required.
|
|
|
This
product is operated by delicate
electric circuit system,
therefore, users can use
a
prolonged fluorescent
lamp.
|
|
|
|
|
|
|
This
product can be used only
in usual illumination, so
avoid using in wet environment.
|
|
Firstly,
turn off the power when
it is installed or dismantled.
|
|
When
dismantling, grabbing the
plastic mould parts.
|
|
Watch
out in order not to touch
both metal sides of the
fluorescent lamp.
|
|
When
the fluorescent lamp is
out of order, confirm the
lighting shade and connected
socket. And then, check
out the voltage. If
not so, replace old lamp
with new one.
|
|
Never
drop or press the lamp shade
in moving.
|
|
Be
sure to be tight installation.
|
|
Change
the socket when it is out
of order so as not to drop.
|
|
Follow
the safety rules when you
work.
|
|
|
|
|
|
|
|
|
|
|
|
|
In
case of replacing Inductance
Lamp Socket,
be
sure to get rid of the ballast
stabilizer and light starter.
When this product
is installed with the ballast
stabilizer and light starter,
this saving fluorescent
lamp may be damaged.
|
|
|
|
|
|
|
|
|
Firstly
block the power of electronic
ballast stabilizer.
And
then, draw the two power
supply tubes of socket and
connect the
electric terminal
of the fluorescent lamp
supporter.
Never connect
two voltage lines with two
electric terminals of the
fluorescent supporter.
That may cause disconnection.
Keep
in mind not to fault by
wrapping all the metals
in socket and Through
Insulation.
|
|
|
|
|
|
|
|
when connecting the lamp with general socket, you have only to connect the lamp with
both sides of socket and select the suitable part and fix it.
|
|
|
|
|
|
|
|
|
Model
|
Watt
|
Length
/ Size
|
Color(ra)
|
|
POLLUX
CC-7W
|
7W
|
600mm
|
86
|
|
POLLUX
CC-10W
|
10W
|
600mm
|
86
|
|
POLLUX
CC-13W
|
13W
|
1,200mm
|
86
|
|
POLLUX
CC-16W
|
16W
|
1,200mm
|
86
|
|
|
|
|
Model
|
POLLUX
CC-16W
|
POLLUX
CC-13W
|
|
Input
voltage
|
AC110-250V
50Hz/60Hz
|
AC110-250V
50Hz/60Hz
|
|
Length
|
1200mm
|
1200mm
|
|
Used
watt
|
16W
|
13W
|
|
Light
speed
|
<
0.4s
|
<
0.4s
|
|
Used
current
|
75mA
|
60mA
|
|
The
efficiency of used current
|
>
0.90
|
>
0.90
|
|
Light
efficiency
|
>
75 LM / W
|
>
68 LM / W
|
|
Light
illumination(1.5meter)
|
155Lux
|
128Lux
|
|
Color
|
Ra:
86
|
Ra:
86
|
|
The
height of lamp
|
Over
2.5meter
|
Below 2.5meter
|
|
|
|
|
|
|
|
|
(example)
Average cost of energy :
US$0.10 / KWH, Monthly
400 hrs Use
|
|
Model
|
Cost
of
energy
(US
$)
|
Lamp
watt
(W)
|
Monthly
us
(HR)
|
Lamp
number
(EA)
|
Monthly
energy
(KWH)
|
Monthly
cost
(US
$)
|
|
T8-40W
|
0.10
|
40
|
400
|
1,000
|
16,000
|
1,600
|
|
T8-32W
|
0.10
|
32
|
400
|
1,000
|
12,800
|
1,280
|
|
Saving
29W
|
0.10
|
29
|
400
|
1,000
|
11,600
|
1,160
|
|
POLLUX
CC-16W
|
0.10
|
16
|
400
|
1,000
|
6,400
|
640
|
|
POLLUX
CC-13W
|
0.10
|
13
|
400
|
1,000
|
5,200
|
520
|
|
|
|
|
|
|
|
|
|
(example)
Average cost of energy :
US$0.10 / KWH, Monthly
400 hrs Use
|
|
Model
|
Cost
of
energy
(US
$)
|
Lamp
watt
(W)
|
Yearly
use
(HRS)
|
Lamp
number
(EA)
|
Monthly
energy
(KWH)
|
Monthly
energy
cost
(US
$)
|
Yearly
energy
(KWH)
|
Yearly
energy
cost
(US$)
|
|
T8-40W
|
0.10
|
40
|
4,800
|
1,000
|
16,000
|
1,600
|
192,000
|
19,200
|
|
T8-32W
|
0.10
|
32
|
4,800
|
1,000
|
12,800
|
1,280
|
153,600
|
15,360
|
|
Saving
29W
|
0.10
|
29
|
4,800
|
1,000
|
11,600
|
1,160
|
139,200
|
13,920
|
|
POLLUX
CC-16W
|
0.10
|
16
|
4,800
|
1,000
|
6,400
|
640
|
76,800
|
7,680
|
|
POLLUX
CC-13W
|
0.10
|
13
|
4,800
|
1,000
|
5,200
|
520
|
62,400
|
6,240
|
|
|
|
|
|
|
|
|
|
(example)
Average cost of energy :
US$0.10 / KWH, Monthly
400 hrs Use
|
|
Based
on
1,000
units
|
T8-40W
fluorescent
lamp
|
T8-32W
fluorescent
lamp
|
Saving
29W
fluorescent
lamp
|
POLLUX
CC-16W
fluorescent
lamp
|
POLLUX
CC-13W
fluorescent
lamp
|
|
Energy
consumption
(W)
|
40W
|
32W
|
29W
|
16W
|
13W
|
|
Yearly
energy
cost
(US$)
|
19,200
|
15,360
|
13,920
|
7,680
|
6,240
|
|
Yearly
saving
cost(US$)
|
0
(Reference)
|
-3,840
|
-5,280
|
-11,520
|
-12,960
|
|
Fluorescent
cost
(replacement
cost)
|
2,000
|
2,000
|
3,000
|
13,000
|
13,000
|
|
Fluorescent
lamp+ballast
(new installation
cost)
|
7,000
|
7,000
|
8,000
|
13,000
|
13,000
|
|
Total
(new installation)
Yearly energy
cost + Lamp
+ Ballast (US$)
|
26,200
|
22,360
|
21,920
|
20,680
|
19,240
|
|
|
-
One Year Energy cost + Initial
Installation Cost would
not be much different, however,
our saving cost
after
one year would be over US$1,000
against other fluorescent
lamps, based on 1,000 lamps.
-
Retail Prices : ex) Elec.
Ballast Stabilizer : US$5.00,
40W/32W Fluorescent Lamp:
US$2.00, 29W Saving
Lamp : US$3.00,
Our 13W/16W :
US$13.00
-
Due to our life time would
be 2~3 times longer by 20,000
hrs. than other lamps, therefore,
it also can
be
additionally saved on the
replacement cost.
|
|
|
|
|
|
|
(example)
Average cost of energy :
US$0.10 / KWH, Monthly
400 hrs Use
|
|
Based
on
1,000
units
|
T8-40W
fluorescent
lamp
|
T8-32W
fluorescent
lamp
|
Saving
29W
fluorescent
lamp
|
POLLUX
CC-16W
fluorescent
lamp
|
POLLUX
CC-13W
fluorescent
lamp
|
|
Energy
consumption
(W)
|
40W
|
32W
|
29W
|
16W
|
13W
|
|
Monthly energy
cost (US$)
|
1,600
|
1,280
|
1,160
|
640
|
520
|
|
Monthly saving
cost(US$)
|
0
(Reference)
|
-320
|
-540
|
-960
|
-1,080
|
|
Life
time (hrs) of
Fluorescent
lamp
|
8,000
hrs
(20 months)
|
8,000
hrs
(20 months)
|
16,000
hrs
(40 months)
|
20,000
(50
months)
|
20,000
(50
months)
|
|
Fluorescent
lamp+ballast
monthly
depreciation
cost
(US$)
|
350
|
350
|
200
|
260
|
260
|
|
Total
(Monthly
energy cost
+ depreciation
cost)
|
1,950
|
1,630
|
1,260
|
900
|
780
|
|
Saving
Rate (%)
|
0
(Reference)
|
-16.4%
|
-35.4%
|
-53.8%
|
-60%
|
|
Monthly
Saving Cost
(US$)
|
0
(Reference)
|
-320
|
-690
|
-1,050
|
-1,170
|
|
|
-
Base on each 1,000 lamps
: The above is totally calculated
by the monthly energy costs
and monthly
depreciation
costs (applied by
each life times and initial
installation cost)
|
|
|
|
|
|
|
(example)
Average cost of energy :
US$0.10 / KWH, Monthly
400 hrs Use
|
|
Based
on
1,000
units
|
LED-25W
fluorescent
lamp
|
LED-20W
fluorescent
lamp
|
LED-15W
fluorescent
lamp
|
POLLUX
CC-16W
fluorescent
lamp
|
POLLUX
CC-13W
fluorescent
lamp
|
|
Energy
of
Fluorescent
lamp (W)
|
25W
|
20W
|
15W
|
16W
|
13W
|
|
Monthly energy
cost (US$)
|
1,000
|
800
|
600
|
640
|
520
|
|
Monthly saving
cost(US$)
|
0
(Reference)
|
-200
|
-400
|
-380
|
-480
|
|
Life
time (hrs) of
Fluorescent
lamp
|
50,000
hrs
(125
months)
|
50,000
hrs
(125
months)
|
50,000
hrs
(125
months)
|
20,000
(50
months)
|
20,000
(50
months)
|
|
Lamp
Unit Price
Retail
(US$)
|
100
|
80
|
60
|
13
|
13
|
|
Lamp
Total Price
X
1,000 units
(US$)
|
100,000
|
80,000
|
60,000
|
13,000
|
13,000
|
|
Monthly
depreciation
cost
(US$)
|
800
|
640
|
480
|
260
|
260
|
|
Total
(Monthly
energy cost
+ depreciation
cost)
|
1,800
|
1,440
|
1,080
|
900
|
780
|
|
Saving
Rate (%)
|
0
(Reference)
|
-20%
|
-40%
|
-50%
|
-56.5%
|
|
Monthly
Saving Cost
(US$)
|
0
(Reference)
|
-360
|
-720
|
-900
|
-1,020
|
|
|
-
Base on each 1,000 lamps
: The above is totally calculated
by the monthly energy costs
and monthly
depreciation
costs (applied by
each life times and initial
installation cost)
|
|
|
|
|
|
|
The
national franchise agency
and local agency (experienced
electrical constructor and
qualified person)
|
|
The
role of agency : Free replacement
of fluorescent lamps for
underground parking lots
and factories in
each region (replacement
for 40W/36W/32W, 120cm)
|
|
The
profitable summary of agency
(example – underground parking
lots of building/apartment)
|
|
|
*
The free replacement cost
: 13W/16W x 1,000
pieces x @US$15.00(Lamps+Labor
cost)
=
US$15,000
|
|
*
The former electrical power
cost : 1kwh/@US$0.10
(Monthly 400hours )
-
40W x 400hours x 1,000pieces
= 16,000kwh x @US$0.10 =
US$1,600/month
|
|
*
Electrical power cost and
saving money by replacing
our product 13W/16W
1)
13W x 400hours x 1,000pieces
=
5,200kwh
x @US$0.10 = US$520/month(US$1,080
- 67.5% Saved)
2)
16W x 400hours x 1,000pieces
=
6,400kwh
x @US$0.10 = US$640/month(US$960
- 60% Saved)
|
|
*
Contract with building owner
after installation :
paying the total saving
money to the agency for
2 years(24months or 30months)
-
13W/16W : Contract Amount
:
one
month US$1,000 x 24
months = US$24,000 (Total
collecting amount) x
30 months = US$30,000 (Total
collecting amount)
|
|
*
Margin : US$24,000
– US$15,000 = US$9,000 (
for 24 months)
US$30,000
– US$15,000 = US$15,000
( for 30 months)
|
|
|
*
The product expense
supplies from the financial
company to be made a loan
|
|
|
|
|
|
|
Merit
|
|
1.
High profit rate than general
sales
2. Very easy in
sales owing to free installment
and wide extend to sales
3. Easy to install due
to the simple main target
sites (Underground parking
lots and Factories)
4.
The low risk for the collecting
of the money from building
operation expenses
5.
Almost needless customer
service, easy to manage
6.
Possible to do exclusive
business (Blue ocean marketing)
|
|
Demerit
|
|
1.
Much initial investment
cost for the free installation
2. Long time to gain
profit in compared with
investment cost (26~32months)
3.
Need to manage specially
owing to not connecting
with current fluorescent
Lamps
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vision
21st Century
|
|
ModooTronix
Inc. is the venture
company in Korea that does
a business of ESCO franchise
and exports highly ultra
efficient fluorescent lamps
invented for the first time
in the world.
We are
the company that provides
the Ultra Energy Saving
Fluorescent Lamps (POLLUX)
of the most extreme high
efficiency in the world
by ESCO franchise business
system.
We
are sure that our innovative
lamps, the supreme blue
ocean item, will be the
leader in the world market
of the fluorescent lamp
in near the future owing
to extremely high efficiency,
ultimate energy saving and
endurance of up to 20,000
hours of product life time.
Our
company plays a important
role in the oppression of
carbon generating, electrical
energy saving
up to
50%~70% and wants to export
it to all over the world.
We will supply the new
innovative products to the
world market continually
as well.
We
also plan to accomplish
the vision of venture
business on furnishing the
world market with the supreme
products, marketing share
within 5 years.
|
|
|
|
|
|
|
- The Introduction of
Modoo Energy Saving Fluorescent
Lamp (English)
|
|
|
-
Test Report
|
|
|
|
|
|
|
|
