BHF-200 is used as a speaker phone in a car, office or at home. In additional to its special feature, sound quality is much strengthened, because BHF-200 is supported by full-duflex with noise and echo cancellation using DSP and meets Bluetooth 2.0 standard. The design by ultra slim 13mm thickness and black color is simple and refine. BHF-200 is available for 12 solid hours on a single charge.

 

- Universal Bluetooth HandsFree Car Kit for All kind of   Bluetooth Phone.
  (Compatible with all kinds of GSM / CDMA / TDMA / WCDMA bluetooth phones.)

- Ultra Slim design

- Rechargeable Battery Type

- Sunvisor Type

- Digital Noise & Echo Suppression System

- Full Two Ways (Duplex) Conversation

- Automatic Re-connection

- Easy Set up and Simple Operation

- Modern & Elegant Design

- Surge Prevention Circuit

- Provides the Best Sound Clarity with Little or No Distortion. (Superior Sound Quality)

 

Bluetooth Version

Meets 2.0 Bluetooth Standard

Talk Time

12 Hours

Speaker Power Output

2W

Operating Temperature

-10¡É~+60¡É

Battery

1100mA Li-Polymer

Product Dimension

60mm (W) X 124mm (L) X 13mm (T)

Package Dimension

211mm (W) X 165mm (L) X 41mm (T)

Weight

100g

Accessory

Car Charger, Clip, User Guide

Compatibility

This unit is compatible with most Bluetooth equipped
cellular phones including Motorola, Sony Ericsson and
Nokia, Samsung, LG, Etc

 

Volume up button - is used during the initial set up.  

Volume up / down  button - controls the speaker volume.

Multi-Function button - Controls ¡®Power On/Off¡¯, ¡®Active/Stand-by¡¯, and ¡®Voice Dialling¡¯

Status LED Indicators
 
    1) Power LED  : Power on Mode
     2) LED 1 : Connecting Status
                        Stand by Mode  :  two times blinking every two second
                        Pairing Mode  : blinking continuously.
                        Active Mode  : Power on continuously
     3) LED 2 : Call Activity Status
                        Sending and Receiving Phone Call : Blinking shortly
                        Active call : Lightning continuously
     4) LED 3 ( Low battery Status ) : LED blinking continuously  

 

>> Charging HandsFree

Use the vehicle power charger provided.
BHF-200 uses a rechargeable battery that must be fully charged before you use it for the first time. Connect the supplied vehicle power charger to power socket and then to your HandsFree. The status of indicator on Vehicle charger will be illuminated red while charging and change to Green when the HandsFree is fully charged. It takes approximately 2 hours to fully charge the Handsfree. 
NOTICE : If battery is Low, Red light of the LED 3 will blink in every second.

>> Pairing your Bluetooth cellular phone with the ULTRA SLIM (BHF-200)

 Turn on both devices.  For Handsfree, press the multi-function button for two seconds.
1) Place the Hands-free in pairing mode by pressing and holding the volume down button for
     five seconds.  Release the button when the status indicator(LED1) begin to fast flash with
     beep sound.
     NOTICE : If the pairing is not success for two minutes, the HandsFree becomes to stand-by
                    mode.
2) Use your phone¡¯s menu to search for Bluetooth audio devices and select ¡°BHF-200¡±
3) When the phone display asks for a pass key, enter  ¡° 0 0 0 0 ¡±.
     The Bluetooth icon appears on the display, once the handsfree successfully paired.
     If the Handsfree stops responding to button presses, you must reset the handsfree.

>> Using the ULTRA SLIM (BHF-200) as a Handsfree Device

1) Power On / Off
     Press the multifunction buttons for two seconds in order to turn on the device.
     Press the multifunction buttons for five seconds in order to turn off the device.
2) Connect the Handsfree to the phone
     
When disconnected, the Handsfree can be reconnected to the phone by simply short pressing
     the multi-function button.
3) Disconnect the Handsfree from the phone
 
    Press the volume up /down button simultaneously for a second.
     It is only possible while there is no on going call.
4) Answer / End / Place a call
 
    To answer a call, short press the multi-function button.
     To end a call, long press the multi-function button for two seconds.
     To place a call using voice dialing, short press the multi-function button.
     If you are on a calling using your phone handset, you can transfer the call to your Handsfree
     by two times press of the multi-function button.
5) Call transfer back to phone
 
    To transfer a call from your Handsfree back to your phone, two times press of the
     Multi-function button.  
6) Call reject
 
    To reject an incoming call without answering when the Handsfree is ringing, long press the
     multi-function button.
7) Last number redial  
     To redial the last number, two times press the multi-function button.
8) Volume Up / Down
 
    Press the volume up / down button to adjust the volume.
     During a call, press the Volume Control Buttons to adjust  the volume.
9) Mute / Un-mute       
     Press the volume up and down button simultaneously.
10) Auto Power Off
 
    The power is turned off automatically when the handsfree does not work for one hour.
11) Auto Reconnecting
     BHF-200 automatically reconnect to the last phone used if the BHF-200 is already on.

>> Reset HandsFree

To clean BHF-200, stick a pin into the hole on the back side.

>> Troubleshooting

The Handsfree will not turn on
      The Hands-free battery may be flat. Try recharging the HandsFree.
Pairing is unsuccessful
     
Try moving the phone and HandsFree closer together during pairing.
      Make sure that the mobile phone is in the correct Bluetooth mode.
      Some electrical devices such as microwave ovens create a noisy electrical environment making
      it difficult for the HandsFree to communicate with the phone.
      Try moving away from such devices and try again.
Pairing has succeeded but call are not heard in the HandsFree
    
Make sure that your phone is switched on and ready to connect to the HandsFree.
     Check your phone user manual on how to do this.
The HandsFree stops responding to button presses charged

    
Ensure that your Hands-free battery is charged Try resetting your HandsFree according to the      directions given in "Resetting your HandsFree" by turning it Off and On again.
Battery Care
Your Hands-free battery will have a long life provided you follow these lines:
- Do not use any accessory to charge your HandsFree other than the one provided for this
   product.
- Do not charge your HandsFree outdoors.
- Do not charge your HandsFree if the ambient temperature is above 45 degrees Celsius or
   below 10 degrees Celsius.
- Do not leave your Handsfree connected to the charger for extended periods of time, as
   excessive charging will reduce battery life.